武器/道具
写实 道具
UE4.1x UE4.21 UE4.22 UE4.23 UE4.24 UE4.25 UE4.26 UE4.27 UE5.0
|
This fence is based on a popular Australian suburban fencing brand. It fits well in suburban and industrial environments. This pack is heavily optimized, with all meshes relying on only a single material and texture set. The master material is extensively designed with over 64 controllable parameters, allowing you to add or remove features as you please.
Simple but effective modular-building blueprint included. This blueprint allows you to quickly switch material variations, swap between damage variations, and to build in different directions.
Four albedo masks are included to allow you to choose any colour combination you like
Four dirt masks allow you to dynamically control levels of dirt on the posts and fence separately
Seven roughness masks allow you to apply different levels of damage types to the fences, make them look factory new or decades old
Customizable rust mask allows you to dynamically add rust with custom normals and roughness over your model
64 Controllable material parameters ranging from 157 to 229 instructions )with all masks and features enabled).
All textures and masks are provided in 4k, aside from the rust, which is a tiled 2k texture.
There are six base models, with six damaged variations included. When separated into modular pieces, they snap onto a 10cm grid, and can take connections from either left or right. The modular segmented static meshes break down into 16 modular undamaged models, and 12 modular damaged models.
*warehouse not included
技术细节
Number of Unique Meshes: 40
Blueprints: 1 Modular Building Blueprint included for easy world building
Collision: Yes, AutoGenerated
Vertex Count: ~2k to 100 for undamaged models, ~4.9k to 400 for damaged models
LODs: 4 per mesh
Number of Materials and Material Instances: 1 Master Material, 14 example instances included as a guide
Number of Textures: 13
Texture Resolutions: 11 @ 4k, 2 @ 2k
Supported Development Platforms: Tested on Windows, optimized for all platforms
该围栏基于澳大利亚流行的郊区围栏品牌。 它非常适合郊区和工业环境。 该包经过严格优化，所有网格仅依赖于单一材质和纹理集。 主材料经过广泛设计，具有超过 64 个可控参数，允许您根据需要添加或删除功能。
包括简单但有效的模块化建筑蓝图。 该蓝图允许您快速切换材料变化、损坏变化之间的交换以及沿不同方向进行构建。
包含四个反照率蒙版，让您可以选择您喜欢的任何颜色组合
四个污垢遮罩可让您分别动态控制柱子和栅栏上的污垢程度
七个粗糙度蒙版可让您对围栏应用不同程度的损坏类型，使它们看起来像工厂新的或几十年前的样子
可定制的锈迹掩模允许您在模型上动态添加具有自定义法线和粗糙度的锈迹
64 个可控材料参数，范围从 157 到 229 条指令）（启用所有掩模和功能）。
除了铁锈（平铺的 2k 纹理）之外，所有纹理和遮罩均以 4k 提供。
有六种基本型号，其中包括六种损坏的变体。 当分成模块化部件时，它们会卡入 10 厘米的网格，并且可以从左侧或右侧进行连接。 模块化分段静态网格物体分为 16 个模块化未损坏模型和 12 个模块化损坏模型。
*不包括仓库
技术细节
独特网格数量：40
蓝图：包含 1 个模块化建筑蓝图，可轻松构建世界
碰撞：是的，自动生成
顶点数：未损坏模型约为 2k 至 100，损坏模型约为 4.9k 至 400
LOD：每个网格 4 个
材质和材质实例的数量：1 个主材质，14 个示例实例作为指南
纹理数量：13
纹理分辨率：11 @ 4k、2 @ 2k
支持的开发平台：在 Windows 上测试，针对所有平台进行了优化
|
|
